Kit 1 A is for use with our fuel injection kits. Everything you need to complete your new injection kit.
Includes:
1x Locked-out Pro Billet HEI distributor. CNC machined with hardened steel drive shaft and sealed ball bearings. We TIG weld and lock them out for you. Each unit is marked on the body to line up and phase in.
4x NGK Resistor spark plugs. On electronic systems you will need plugs that have a built in resistor. Just pick the style plug your cylinder heads require. 14mm x 1/2", 14mm x3/4" or 12mm x 3/4"
1x Set of FiTech Ceramic Spark Plug wires. Each set is made from 8mm low resistance/high noise suppression Ferro-Spiral core ultra-high temperature double silicone rated at 600+ degrees F, is built using stainless steel spark plug terminals and ceramic spark plug boots that are capable of withstanding up to 2,000 degrees F making them ideal for applications with close tolerance headers and any other applications where boot failure is an issue. Includes soft VW style air seals at the plug for stock VW plug holes to help seal up. (see pictures). Includes wire separators, dielectric grease packet, and wire cutter/stripper tool.
1x Round High Output coil with mounting bracket. Coil Style: Canister, Primary Resistance: 0.600 ohms
Coil Internal Construction: Oil-filled, Maximum Voltage: 40,000 V, Turns Ratio: 70:1, Secondary Resistance: 3.10K ohms, Peak Current: 180 mA, Spark Duration: 170 uS, Mounting Bracket Included: Yes
This kit is perfect for our fuel injection kits or Turbo injection kits.