Info about our Port Injection Option.
We can mount one or two injectors in each end-castings manifold.
This is a real good idea on low vacuum combos like draw-through turbo, big camshafts with lots of duration or big intake ports. Helps with starting, throttle
response, MPG, and intake charge cooling. Good idea on cold climate use as the fuel is injected at the very end of the intake runner and less icing can occur.
2x Port Injection
This will add one extra injector per side on each end-casting or plenum.
This includes:
2x USA made CNC weld in injector mounts.
Extra AN Push-Loc fittings and 5'x extra feet of fuel line.
Extend 2x injector harness to reach out to your manifolds.
Block off injector ports now not used in injection unit.
You can have us TIG weld the injector bosses to your end-castings,
or we can sell you a new set stock click here. The labor to weld is
free or we send you the weld in mounts for you to weld.
Have questions about this unit
or if fuel injection is good for your combo?
Give us a call at the stop, We can answer all your
questions and get you back to enjoying your car
again!
Open M-F 9-6 Sat 10-3
714-639-4284
870 N Batavia
Orange Ca 92868